Volume 25,Issue 6,2012 Table of Contents

   
Other Issues:  
  

摩擦学

Overview on the Shot Peening Principle and Its Strengshening Mechanisms for Metallic Materials
  WANG Ren–zhi
  2012,25(6):1-9 [Abstract(5853)]  [View PDF 2.34 M (4272)]
  

表面工程

Effect of Dryice Blasting on the Microstructure and Properties of Plasmasprayed Metallic Coatings
  DONG Shu–juan1, SONG Bo1, HANSZ Bernard2, LIAO Han–lin1, CODDET Christian1
  2012,25(6):10-14 [Abstract(4521)]  [View PDF 2.03 M (2714)]
  
Technological Parameter and Influence of Rare Earth for Plasma Nitrocarburzing of SKD11
  CHEN Ji–chao, WU Xiao–chun, YANG Hao–peng
  2012,25(6):15-20 [Abstract(5075)]  [View PDF 2.56 M (2351)]
  
Effects of Voltage on the Microstructure and Corrosion Performance of Microarc Oxidation Coated AZ31 Magnesium Alloys
  GU Yan–hong1, CAI Xiao–jun1, NING Cheng–yun2, XIONG Wen–ming3, YUE Wen4, HAO Bao–hong1
  2012,25(6):21-28 [Abstract(6290)]  [View PDF 5.20 M (2784)]
  
Erosion Behaviors of Titanium Alloy and Ti/TiN/Zr/ZrN Multilayer Coatings Deposited on Titanium Alloy
  LAN En–hui1,2, DAI Ming–jiang1,2, HU Fang2, LIN Song–sheng2, HOU Hui–jun2
  2012,25(6):29-33 [Abstract(4321)]  [View PDF 2.67 M (2358)]
  
Microstructure and Tribological Properties of CrN and CrAlN Films Under Different Contact Conditions
  FU Ying–ying1,2, LI Hong–xuan1, JI Li1, LIU Xiao–hong1, ZHOU Hui–di1, CHEN Jian–min1
  2012,25(6):34-41 [Abstract(5391)]  [View PDF 2.71 M (2259)]
  
Efects of Ion Source on the Structure and Properties of AlN Thin Films Deposited by MF Reactive Magnetron Sputtering
  LIU Lan-lan1,2, LIN Song-sheng1,2, ZENG De-chang1, DAI Ming-jiang2, HU Fang2
  2012,25(6):42-46 [Abstract(4855)]  [View PDF 1.97 M (2704)]
  
Preparation and Characterization of Hydrogen Containing Sidoped DLC Film
  HU Fang, DAI Ming-jiang, LIN Song-sheng, LUO Shun, HOU Hui-jun, SHI Qian, WEI Chun-bei
  2012,25(6):47-52 [Abstract(4030)]  [View PDF 2.02 M (2229)]
  
Preparation of AZO Thin Films on PET Substrate Using DC Magnetron Sputtering
  WANG Cui-feng1, CHIOU Shi-yung2, JHAO Yi-syuan2, OU Keng-liang3
  2012,25(6):53-60 [Abstract(4517)]  [View PDF 2.25 M (2330)]
  
Tribological Behavior of Two Types of WC-based Coatings at 600 ℃
  HOU Guo-liang1,2, AN Yu-long1, CHEN Jie1,2, CHEN Jian-min1, ZHOU Hui-di1, ZHAO Xiao-qin1, YANG Jie1,2
  2012,25(6):61-67 [Abstract(5149)]  [View PDF 2.52 M (2448)]
  
Optimization of the Preparation Technique of MCrAlYs High Temperature Seal Coating and Its Performance
  YANG Wei-hua
  2012,25(6):68-72 [Abstract(3840)]  [View PDF 3.55 M (2198)]
  
Impact of Interface Contact Temperature on the APS Seal Coating
  CHEN Zhi-kun, LIU Zi-jing, ZHU Hui-zhao, ZHANG Zhong-cheng
  2012,25(6):73-78 [Abstract(4225)]  [View PDF 2.54 M (2576)]
  
Measurement of Surface Residual Stress of 3003 Aluminum Alloy by Xray Diffraction
  DUAN Neng-quan1, REN Jian-liang1, PANG Rui-qiang2, WU Hao-tian3
  2012,25(6):79-84 [Abstract(4279)]  [View PDF 1.07 M (3065)]
  
Investigation of Surface Microstructure of Backup Rolls Steel Under Contact Fatigue
  WANG Yu-huia, LIU Li-ganga, CAI Da-yongb, XIAO Fu-renb, YANG Qing-xiangb, LIAO Bob
  2012,25(6):85-89 [Abstract(4143)]  [View PDF 2.00 M (2681)]
  

再制造工程

Engineering Management Problems of Remanufacturing Industry
  XU Bin-shi1, SHI Pei-jing1, LIU Bo-hai2, ZHOU Xin-yuan1
  2012,25(6):107-111 [Abstract(4389)]  [View PDF 1.38 M (2893)]
  

第九届全国青年表面工程会议论文-苏州

Effect of Rotational Speeds and Mated Balls on the Vacuum Tribological Properties of a-C∶H film
  WU Yan-xia1,2, LI Hong-xuan1, JI Li1, YE Yin-ping1, CHEN Jian-min1, ZHOU Hui-di1
  2012,25(6):90-95 [Abstract(4347)]  [View PDF 2.00 M (2507)]
  
Prediction of Critical Velocity in Cold Spraying Based on Numerically Calculated Steady Maximum Equivalent Plastic Strain
  WANG Fei-fan, LI Wen-ya, YU Min
  2012,25(6):96-100 [Abstract(5350)]  [View PDF 1.76 M (3182)]
  
Preparation and Osteogenesis of Active Secondary Microporous on the Porous Ti3Zr2Sn3Mo25Nb Titanium Alloy
  YU Sen1, YU Zhen-tao1, HAN Jian-ye1, ZHANG Ming-hua2, NIU Jin-long1, LIU Chun-chao1
  2012,25(6):101-106 [Abstract(4229)]  [View PDF 2.45 M (1999)]
  

应用实例

[例29]自熔剂合金喷熔在油田抽油泵柱塞上的应用
  张忠臣,钱犇,鲁正延,魏峰,曹刚
  2012,25(6) [Abstract(3625)]  [View PDF]