[1] 邹家生, 许峰, 卢龙. 齿轮表面改性技术研究现状[J]. 江苏科技大学学报(自然科学版), 2009, 23(2):113-116. ZOU J S, XU F, LU L. The status quo of gear surface modification technology[J]. Journal of Jiangsu University of Science & Technology, 2009, 23(2):113-116(in Chinese).
[2] 赵韩, 吴其林, 黄康, 等. 国内齿轮研究现状及问题研究[J]. 机械工程学报, 2013, 49(19):11-20. ZHAO H, WU Q L, HUANG K, et al. Status and problem research on gear study[J]. Journal of Mechanical Engineering, 2013, 49(19):11-20. (in Chinese)
[3] 高玉魁, 赵振业. 齿轮的表面完整性与抗疲劳制造技术的发展趋势[J]. 金属热处理, 2014, 39(4):1-6. GAO Y K, ZHAO Z Z. Development trend of surface integrity and anti-fatigue manufacture of gears[J]. Heat Treatment of Metals, 2014, 39(4):1-6.
[4] GOROKOVSKY V I, BOWMAN C, GANNON P E.Deposition and characterization of hybrid filtered arc/magnetron multilayer nanocomposite cermet coatings for advanced tribological applications[J]. Wear, 2008, 265(5/6):741-755.
[5] 田亚媛, 瞿皎, 秦亮, 等. 齿轮表面强化技术研究现状[J]. 热加工工艺, 2011, 40(24):211-215. TIAN Y Y, QU J, QIN L, et al. Research status on gear surface strengthening technology[J]. Hot Working Technology, 2011, 40(24):211-215(in Chinese).
[6] 陈勇. 高强度汽车齿轮材料技术的现状及发展[J]. 材料科学与工程学报, 2000, 18(s1):95-98. CHEN Y. Present situation and development of high strength automobile gear materials technology[J]. Journal of Materials Science and Engineering, 2000, 18(s1):95-98(in Chinese).
[7] 谭毅, 李敬锋. 新材料概论[M].北京:冶金工业出版社, 2004. TAN Y, LI J F. Introduction to new material[M]. Beijing:Metallurgical Industry Press, 2004(in Chinese).
[8] NAUNHEIMER H, BERTSCHE B, RYBORZ J, et al. Automotive transmissions[M]. Springer Berlin Heidelberg, 2011.
[9] 常晓东, 刘道新, 崔腾飞,等. 渗碳与喷丸复合处理对18Cr2Ni4WA钢表面完整性及疲劳性能的影响[J]. 机械科学与技术, 2013, 32(11):1584-1590. CHANG X D, LIU D X, CUI T F, et al. Influence of Carburizing Combined with Shot Peening on Surface Integrity and Fatigue Behavior of 18Cr2Ni4WA Steel[J]. Mechanical Science & Technology for Aerospace Engineering, 2013, 32(11):1584-1590.
[10] 吉田誠, 永濱睦久, 田中敏行. 歯面強度に優れた浸炭窒化歯車用鋼の開発[J]. Jatco Technical Review, 2005(6):48-57. YOSHIDA M, NAGAHAMA M, TANKA T, et al. Development of carboinitrided gear steel for excellent tooth surface strength[J]. Jatco Technical Review, 2005(6):48-57(in Japanese).
[11] MOROMASA M, JU D Y. Study on transformation plasticity behavior of material SUS420J2[C]. Materials Science Forum, 2015:145-149.
[12] JU D Y, INOUE T. On the Material process simulation code COSMAP-simulated examples and its experimental verification for heat treatment process, Key Engineering Materials, 2007, 345-346:955-958.
[13] 吴文健. 我国齿轮热处理技术发展现状[J]. 热加工工艺, 2013, 42(10):35-37. WU W J. Development situation of technology and equipment of gear heat treatment in China[J]. Hot Working Technology, 2013. 42(10):35-37(in Chinese).
[14] 己之上潤二, 中井靖文, 花木昭宏. 新しい高周波焼入れと疲労強化方法について[J]. 熱処理, 2013, 53(3):106-111. MINOUE J, NAKAI Y, HANAKI A. New induction hardening processes and fatigue strength improvement methods[J]. Heat Treatment, 2013, 53(3):106-111(in Japanese).
[15] 陈晖, 周细应. 汽车齿轮热处理工艺的研究进展[J]. 材料导报, 2010, 24(13):93-96. CHEN H, ZHOU X Y. Review and progress of heat treatment process for automobile gear[J]. Materials Review, 2010. 24(13):93-96(in Chinese).
[16] PALANIRADJA K, ALAGUMURTHI N, SOUNDARARAJAN V. Evaluation of Process capability in gas carburizing process to achieve quality through limit design concept[J]. 材料热处理学报, 2004, 25(5):395-397.
[17] MORAIS R, REGULY A, ALMEIDA L. Transmission electron microscopy characterization of a Nb microalloyed steel for carburizing at high temperatures[J]. Journal of Materials Engineering & Performance, 2006, 15(4):494-498.
[18] 巨东英. 日本金属热处理未来发展路线概述[J]. 金属热处理, 2012, 37(1):14-20. JU D Y. Future development roadmap of metal heat treatment in Japan[J]. Heat Treatment of Metals, 2012, 37(1):14-20(in Chinese).
[19] FUJⅡ M, MIZUNO Y, YOSIDA A. Influence of artificial defect on rolling contact fatigue strength of steel roller[C]//MPT. Fukuoka:the JSME international conference on motion and power transmissions. The Japan Society of Mechanical Engineers, 2007:43-46.
[20] SHERAFATNIA K, FARRAHI G H, MAHMOUDI A H, et al. Experimental measurement and analytical determination of shot peening residual stresses considering friction and real unloading behavior[J]. Materials Science & Engineering A, 2016, 657:309-321.
[21] FARGAS G, ROA J J, MATEO A. Effect of shot peening on metastable austenitic stainless steels[J]. Materials Science & Engineering A, 2015, 641:290-296.
[22] ZHANG J W, LU L T, SHIOZAWA K, et al. Analysis on fatigue property of microshot peened railway axle steel[J]. Materials Science & Engineering A, 2011, 528(3):1615-1622.
[23] YOSHITA M, IKEDA A, KURODA S. Improve-ment of CVT pulley wear resistance by micro-shot peening[J]. JATCO Technical Review, 2004(5):51-59.
[24] LV Y, LEI L, SUN L. Effect of shot peening on the fatigue resistance of laser surface melted 20CrMnTi steel gear[J]. Materials Science & Engineering A, 2015, 629:8-15.
[25] HAN B, JU D Y. A method for improving compressive residual stress of small holes surface by water-jet cavitation peening[C]//Materials Science Forum, 2009:137-142.
[26] FENG X, ZHOU J Z, MEI Y F, et al. Improving tribological performance of gray cast iron by laser pee ning in dynamic strain aging temperature regime[J]. Chinese Journal of Mechanical Engineering, 2015, 28(5):904-910.
[27] RAKITA M, WANG M, HAN Q, et al. Ultrasonic shot peening[J]. International Journal of Computational Materials Science & Surface Engineering, 2013, 5(3):189-209.
[28] NIEMANN G, RETTIG H, LECHNER G. Scuffing tests on gear oils in the FZG apparatus[J]. Tribology Transactions, 1961, 4(1):71-86.
[29] 刘维民, 夏延秋, 付兴国. 齿轮传动润滑材料[M]. 化学工业出版社, 2005. LIU W M, XIA Y Q, FU X G. Gear lubrication materials[M]. Chemical Industry Press, 2005(in Chinese).
[30] HIVART P, HAUW B, CRAMPON J, et al. Annealing improvement of tribological properties of manganese phosphate coatings[J]. Wear, 1998, 219(2):195-204.
[31] NURAN AY, OSMAN NURI ÇELIK, YAPINCAK Göncü. Wear characteristics of traditional manganese phosphate and composite hBN coatings[J]. Tribology Transactions, 2013, 56(6):1109-1118.
[32] TOTIK Y. The corrosion arrelin of manganese phosphate coatings applied to AISI 4140 steel subjected to different heat treatments[J]. Surface and Coatings Technology, 2006, 200(8):2711-2717.
[33] CHEN Y, YAMAMOTO A, OMORI K. Improvement of contact fatigue strength of gears by tooth surface modification processing[C]//12th IFToMM World Congress, 2007:6.
[34] 石万凯, 姜宏伟, 秦大同, 等. 超微细磷酸锰转化涂层摩擦磨损性能研究[J]. 摩擦学学报, 2009, 29(3):267-271. SHI W K, JIANG H W, QIN D T, et al. Friction and wear performance of superfine manganous phosphate conversion coating[J]. Tribology, 2009, 29(3):267-271(in Chinese).
[35] WANG C M, LIAU H C, TSAI W T. Effects of temperature and applied potential on the microstructure and electrochemical behavior of manganese phosphate coating[J]. Surface & Coatings Technology, 2007, 102(2/3):207-213.
[36] 陳勇. 浸炭歯車のピッチング強度に及ぼす潤滑油の影響[J]. Jatco technical review, 2003(4):83-91. CHEN Y. The influence of ATF on the piting fatigue strength of carburized gears[J]. Jatco technical review, 2003(4):83-91(in Japanese).
[37] 陆世立, 周兰英, 李晋珩. 旋转密封环表面二硫化钼膜制备工艺研究[J]. 润滑与密封, 2009, 34(9):72-75. LU S L, ZHOU L Y, LI J H. Preparation technology of molybdenum disulfide coating for rotating seal ring[J]. Lubrication Engineer, 2009, 34(9):72-75(in Chinese).
[38] CHEN Z, LIU X, LIU Y, et al. Ultrathin MoS2 nanosheets with superior extreme pressure property as boundary lubricants.[J]. Scientific Reports, 2014, 5.
[39] AMARO R I, MARTINS R C, SEABRA J O, et al. Molybdenum disulphide/titanium low friction coating for gears application[J]. Tribology International, 2005, 38:423-434.
[40] HOLMBERG K, MATHEWS A, RONKAINEM H. Coatings tribology-contact mechanisms and surface design[J]. Tribology International, 1998, (12/33):107-120.
[41] MARTINS R C, PAULO S M, SEABRA J O. MoS/Ti low-friction coating for gears[J]. Tribology International, 2006, 39:1686-1697.
[42] 沈玉忠. 金属表面自润滑处理方法, 201310441042.4[P]. 2013-12-25. SHEN Y Z. Metal surface lubrication treatment method:201310441042.4[P]. 2013-12-25(in Chinese).
[43] 罗勇, 谢明强. QPQ技术在汽车零部件上的应用[J]. 现代零部件, 2013(7):58-60. LOU Y, XIE M Q. QPQ technology in auto parts[J]. Auto Manufacturing Engineer, 2013(7):58-60(in Chinese).
[44] LI G J, PENG Q, LI C, et al. Microstructure analysis of 304L austenitic stainless steel by QPQ complex salt bath treatment[J]. Materials Characterization, 2008, 59(9):1359-1363.
[45] 姚玲珍, 邓益中. 复合盐浴渗氮QPQ处理新技术的发展与应用[J]. 内燃机与配件, 2012(5):36-40. YAO L Z, DENG Y Z. Composite aitrided QPQ treatment new technology development and application[J]. Internal Combustion Engine & Parts, 2012(5):36-40(in Chinese).
[46] 王刚, 焦孟旺, 李贺, 等. 热喷涂新技术在发动机减摩性能方面的应用和研究[J]. 表面技术, 2014, 43(1):103-108. WANG G, JIAO M W, LI H, et al. Application and Research of new thermal spraying technology in engine friction-reduction performance[J]. Surface Technology, 2014, 43(1):103-108(in Chinese).
[47] HOYASHITA S, HASHIMOTO M. Surface improvement and durability of case-carburized gear tooth (2nd Report):effects of shot peening and arreling processes[J]. International Journal of the Japan Society for Precision Engineering, 1998, 32(2):104-109.
[48] XU Y C, ZHANG K H, LU S, et al. Experimental investigations into abrasive flow machining of helical gear[J]. Key Engineering Materials, 2013, 546:65-69.
[49] 陈勇. P-SC300日本高精度高效率齿轮性能研究分科会研究成果报告书[C]日本机械学会, 2001, 1:141-145. CHEN Y. P-SC300 Report on the research results of the research on the performance of high precision and high efficiency gears in Japan[C] The Japan Society of Mechanical Engineers, 2001(1):141-145(in Japanese).
[50] CHEN Y. The influence of ATF on the pitting fatigue strength of carburized gears[J]. JATCO Technical Review, 2003(4):84-91.
[51] XIE L, WANG C, WANG L, et al. Numerical analysis and experimental validation on residual stress distribution of titanium matrix composite after shot peening treatment[J]. Mechanics of Materials, 2016, 99:2-8.
[52] LI S. A thermal tribo-dynamic mechanical power loss model for spur gear Pairs[J]. Tribology International, 2015, 88:170-178.
[53] 韩旭. 基于数值模拟的设计理论与方法[M]. 科学出版社, 2015. HAN X.Numerical simulation-based design:theory and methods[M]. Science Press, 2015(in Chinese).