引用本文:
【打印本页】   【HTML】   【下载PDF全文】   View/Add Comment  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 3146次   下载 106 本文二维码信息
码上扫一扫!
分享到: 微信 更多
氧化铝增强无机硅酸锌耐蚀抗磨涂层的研究
马峰,陈华辉,王亦工,裴嵩峰,张婷,桑玮玮
Author NameAffiliation
摘要:
无机硅酸锌涂层常用于大型金属结构件的重防腐保护。文中对氧化铝增强无机硅酸锌涂层进行了研究,结果表明;在试验条件下,氧化铝增强无机硅酸锌涂层的耐蚀性提高了6倍;涂层的滑动摩擦因数为0.2左右,耐磨损性能提高了3倍。氧化铝增强无机硅酸锌涂层为钢铁材料表面的防护提供了新思路和新方法,具有广阔的应用前景。
关键词:  氧化铝 无机硅酸锌涂层 耐蚀性 耐磨性
DOI:
分类号:TG174.45
基金项目:
Study of Anticorrosive & Anti-wear Inorganic Zinc Silicate Coatings Reinforced by Alumina
MA Feng  CHEN Hua-hui  WANG Yi-gong  PEI Song-feng  ZHANG Ting  SANG Wei-wei
Abstract:
Inorganic zinc silicate coatings are frequently used in the heavy-duty anticorrosive protection of large-scale metal structures. Inorganic zinc silicate coatings reinforced by alumina were described at the test condition in this paper. The results showed that the corrosion resistance of coatings was raised 6 times and its wear-resistance was increased 3 times than that of plain coatings. Furthermore, the results indicated that the sliding frictional coefficient of the new coating was about 0.2. Inorganic zinc silicate coatings reinforced by alumina provided a new idea and method for the protection of steel surfaces. It exhibited a broad application prospect.
Key words:  alumina  inorganic zinc silicate coatings  corrosion resistance  wear-resistance