| 摘要: |
| 通过提高基体温度或粒子温度可以突破大气等离子喷涂涂层结合率一般不超过 1 / 3 的瓶颈，然而目前粒子温度难以通过提高功率等方式进一步提高。基于大气层流等离子喷涂的相关研究证明了层流等离子射流具有射流长度长、速度低、能量密度高等特点，能够有效通过提高粒子在等离子射流的滞留时间从而实现对粒子的充分加热。为了研究层流等离子喷涂高熔点 Mo 涂层的结构演变规律与关键影响因素，并推导出金属与陶瓷涂层的一般沉积行为，使用扫描电子显微镜对三种喷涂参数下制备的 Mo 涂层的结构进行了表征与分析。结果表明，喷涂过程中，在等离子射流以及高温粒子对基体的原位加热作用下，Mo 的氧化物蒸气能够在等离子射流扫掠中与扫掠后附着、沉积在涂层表面，从而影响后续 Mo 粒子的沉积而改变涂层的微观结构。涂层的结构主要与 Mo 粒子的蒸发和基体温度有关。粒子蒸发越剧烈，基体温度越高，涂层越趋向于呈现出多孔岛状凸起结构；粒子蒸发越弱，涂层越趋向于呈现出层状结构，有利于实现低氧化、高致密金属涂层的制备，拓宽等离子喷涂的应用。综合以上研究结果，揭示层流等离子射流中的粒子大量蒸发现象与气相沉积过程，为其作为一种大气环境物理气相沉积的实施方式奠定了基础。 |
| 关键词: 等离子喷涂 物理气相沉积 沉积机理 涂层结构 |
| DOI：10.11933/j.issn.1007-9289.20230310001 |
| 分类号:TG156；TB114 |
| 基金项目:国家自然科学基金（91860114）；国家重点研发计划（2021YFB4001400）资助项目 |
|
| Effects of Physical Vapor Deposition on the Microstructure of Atmospheric Laminar Plasma-sprayed Mo Coatings |
|
ZHANG Huiyu, LIU Senhui, DENG Shijie, LI Changjiu, LI Chengxin
|
|
State Key Laboratory for Mechanical Behavior of Materials, Xi’ an Jiaotong University, Xi’ an 710049 , China
|
| Abstract: |
| Relevant studies based on atmospheric plasma spraying have proven that laminar plasma jets have the characteristics of a high length, low velocity, and high energy density, which can effectively heat particles by prolonging their dwell time in the plasma jet. Previous studies have shown that increasing the particle temperature can effectively improve the interlayer bonding rate. During laminar plasma spraying, the particle and substrate temperatures can be smoothly improved by prolonging the particle dwell time and heating the substrate in situ. However, the coating still exhibits a low bonding rate and contains numerous pores. Therefore, studying the deposition mechanism of laminar plasma-sprayed coatings is critical. In this study, the deposition mechanism of a laminar plasma-sprayed Mo coating with a high melting point is analyzed, and the general deposition behaviors of metal and ceramic coatings are deduced by analogy. Further, the structures of the Mo coatings under three spraying parameters are characterized and analyzed using scanning electron microscopy. The main variables of the three spraying parameters are the spray, distance, and powder feeding rates. The tests reveal that coatings with different structures are obtained under the three spray parameters. When the spray distance is short and powder feeding rate is low, numerous protrusions arise on the surface of the coating and several pores are observed inside the coating. When the spray distance is short and powder feeding rate is high, the surface of the coating is flat and the internal bonding is good. When the spray distance is short and powder feeding rate is low, the surface of the coating is flat; however, numerous unbound interfaces appeares inside the coating. During the spraying process, the substrate temperature can reach up to 650 ℃, thus indicating that the spray distance controls the degree of in-situ heating of the substrate by the plasma jet (substrate temperature and vapor phase content in plasma jet). The presence of numerous fluffy structures on the coating surface and inside the coating indicates that the powder feeding rate controls the average heat input of the particles (temperature and evaporation of the particles). Therefore, during the spraying process, the evaporation of molybdenum oxide from the surface of the particles leads to a large composition of the gas phase in the plasma jet. Under the in situ heating effect of the plasma jet and high-temperature particles on the substrate, the molybdenum oxide vapor can adhere to and deposit on the coating surface during or after the plasma jet sweeps the substrate, thus affecting the subsequent deposition of the molybdenum particles and changing the microstructure of the coatings. The structure of the coating is related primarily to the evaporation of the molybdenum particles; a higher substrate temperature and stronger evaporation is more likely to result in the coating exhibiting a porous island structure, whereas a weaker particle evaporation is more likely to result in the coating exhibiting a layered structure. Therefore, to obtain a dense metal coating with a low oxidation by laminar plasma spraying, low powder feeding rate and short spray distance must be ensured. Our results suggest that laminar plasma spraying can yield coatings with a low oxidation content and high density by changing the spraying parameters. Thus, the study demonstrates that laminar plasma spraying has the potential to achieve atmospheric physical vapor deposition in an atmospheric environment. |
| Key words: plasma spraying physical vapor deposition deposition mechanism coating structures |
