| 本文已被：浏览 3461次 下载 2496次 |
码上扫一扫！ |
|
|
| 表面纳米化对304不锈钢渗碳层组织和性能的影响 |
|
王少杰1, 韩靖1, 韩月娇2, 张雪梅3, 赵君文1, 戴光泽1
|
|
1.西南交通大学 材料科学与工程学院, 成都 610031;2.中车青岛四方机车车辆股份有限公司, 山东 青岛 266111;3.中车长春轨道客车股份有限公司, 长春 130062
|
|
| 摘要: |
| 利用表面机械研磨（SMAT）对304不锈钢进行表面自纳米化处理，并对其纳米化表面进行渗碳处理。利用光学显微镜、X-射线衍射仪、磨料磨损试验机和显微硬度仪对处理后的不锈钢表面组织和性能进行研究。结果表明：经SMAT处理并渗碳后，渗碳层晶粒细化，组织发生奥氏体向马氏体转变，显著提高了材料的力学性能；表面机械研磨处理后的材料的渗碳层厚度明显高于直接渗碳的粗晶材料的渗碳层厚度，渗碳层组织中主要碳化物为Cr7C3和Cr23C6，显微硬度也有明显提高；经过表面自纳米化和渗碳复合处理，材料的耐磨性得到较大提升。 |
| 关键词: 304不锈钢 渗碳处理 表面自纳米化 耐磨性 |
| DOI：10.11933/j.issn.1007-9289.20161027003 |
| 分类号:TG178 |
| 基金项目:国家重点研发计划（2016YFB1200505-006） |
|
| Effects of Surface Nano-crystallization on Microstructure and Properties of 304 Stainless Steel Carburized Layer |
|
WANG Shao-jie1, HAN Jing1, HAN Yue-jiao2, ZHANG Xue-mei3, ZHAO Jun-wen1, DAI Guang-ze1
|
|
1.School of Material Science and Engineering, Southwest Jiaotong University, Chengdu 610031;2.CRRC Qingdao Sifang Co., Ltd., Qingdao 266111, Shandong;3.CRRC Changchun Railway Vehicles Co., Ltd., Changchun 130062
|
| Abstract: |
| By means of surface mechanical attrition treatment (SMAT) and carburization, a nanostructured surface and carburized layer was formed on 304 stainless steel. The microstructure and mechanical properties of the surface layer were studied by optical microscope, X-ray diffraction, abrasive wear testing machine and microhardness tester. The results showed that the grains were refined and deformation-induced martensitic transformation was occured in the carburized layer of the SMAT sample, which significantly enhanced its mechanical properties. Compared with the coarse-grained sample, the carburized layer obviously thickened and was mainly composed of Cr7C3 and Cr23C6. The microhardness of surface layer after SMAT treatment and carburization were significantly enhanced. Wear resistance was also remarkably improved after the combination treatment of SMAT and carburization. |
| Key words: 304 stainless steel carburizing treatment surface nanocrystallization wear resistance |