|
摘要: |
基于均匀设计试验设计方法,进行了超音速电弧喷涂Ti-A1涂层磨粒磨损试验,在对试验结果进行逐次回归分析的基础上,系统并定量的研究了涂层耐磨性能随着喷涂工艺参数的变化规律,得到了优化后的最佳喷涂工艺参数。 |
关键词: 超音速电弧喷涂 Ti—Al涂层 磨粒磨损 均匀设计 逐次回归 |
DOI: |
分类号:TG174.442 |
基金项目: |
|
Research on Wear-resistance of Ti-Al Coating Produced by Supersonic Arc Spraying |
ZHOU Yong-tao WANG Han-gong HU Chong-qing YAO Chun-jiang
|
Abstract: |
In this paper, based on the uniform design principle, an abrasive wear test of Ti-Al coating produced by supersonic arc spraying was conducted, and a stepwise regression analysis was made. The changing rule of coating wear-resistance with spraying parameters was studied systematically and quantitatively. The optimum spraying parameters were obtained finally. |
Key words: supersonic arc spraying,Ti-Al coating,abrasive wear,uniform design,stepwise regression |