引用本文:
【打印本页】   【HTML】   【下载PDF全文】   View/Add Comment  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 3059次   下载 87  
分享到: 微信 更多
有机粘结MoS_2固体润滑膜耐腐蚀性能的研究
治银平,陈建敏,周惠娣
Author NameAffiliation
摘要:
通过盐雾试验考察了底材表面磷化处理以及固体润滑膜的粘固比和厚度对其腐蚀性的影响;同时对几种抗腐蚀添加剂和复合膜技术对固体润滑膜耐腐蚀性的改进进行了研究。结果表明:磷化处理可明显提高粘结固体润滑膜的耐腐蚀性能,粘固比对润滑膜的耐腐蚀性有很大的影响,抗腐蚀添加剂和复合膜技术可显著改善固体润滑膜的耐腐蚀性能。
关键词:  粘结固体润滑膜,耐腐蚀性,抗腐蚀添加剂,复合膜技术
DOI:
分类号:TG174.4
基金项目:
A Study on the Corrosion-resisting Properties of Resin Bonded MoS2 Solid Lubrication Films
YIE Yinping CHEN Jianmin ZHOU Huidi
Abstract:
The effects of phosphuration treatment, proportion of adhesive and solid lubricant, and film thinkness on the corrosion resisitance were examined by the salt spray test. The influences of corrosion-resisting additives, and composite film technology on the corrosion-resisting properties of resin bonded MoS2 solid lubrication films were studied. The test results showed that the phosphuration can increase signidicantly the corrosion-resistance, and the proportion of adhesive and solid lubricant shows a great effect on the corrosion-resisting properties of resin bonded MoS2 solid lubrication films. The corrosion-resisting additives and composite film technology can greatly improve their corrosion-resisting properties.
Key words: