|
摘要: |
本文利用OMNICON5000图像分析仪测定了电弧喷涂3Cr13和1Cr18Ni9Ti不锈钢涂层的孔隙率和氧化物含量,考察了喷涂工艺参数对其影响。研究结果为正确控制电弧喷涂工艺提供了实验依据。 |
关键词: 电弧喷涂,不锈钢涂层,孔隙率,氧化物 |
DOI: |
分类号:TG17 |
基金项目: |
|
Effect of Spraying Parameters on Porosity and Oxides Content of Arc-sprayed Stainless Steel Coatings |
San Jinfu, Du Zhi Tsing Hua UniversityBi Zhifu He Bei Research Center of Surface Technology
|
Abstract: |
In this paper, the porosity and oxides content ofArc - sprayed 3Cr13 and 1Cr18Ni9Ti Stainless Steel Coatings were tested by an OMNICON5000 medel image ana-lyzer, and effect of spraying parameters on them was stud-ied. The research result provides experimental basis forcontrolling are spraying process precisely. |
Key words: Are spraying, Stainless Steel, Coatings Porosity, Oxides |