引用本文:余森, 于振涛, 韩建业, 张强, 刘春潮, 牛金龙.纯钛表面两步电化学法制备载银多孔涂层[J].中国表面工程,2013,26(5):83~89
YU Sen, YU Zhentao, HAN Jianye, ZHANG Qiang, LIU Chunchao, NIU Jinlong.Preparation of Agloaded Porous Coatings on Commercially Pure Titanium by Twostep Electrochemical Method[J].China Surface Engineering,2013,26(5):83~89
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 3631次   下载 2743 本文二维码信息
码上扫一扫!
分享到: 微信 更多
纯钛表面两步电化学法制备载银多孔涂层
余森, 于振涛, 韩建业, 张强, 刘春潮, 牛金龙
西北有色金属研究院, 西安 710016
摘要:
在医用纯钛表面先采用阳极氧化法制备TiO2纳米管预涂层,然后通过AgNO3溶液浸泡和紫外光照射处理实现银颗粒在预涂层上的固定,再经过微弧氧化处理制备出载银多孔涂层。利用扫描电子显微镜(SEM)、能谱仪(EDS)、X射线光电子能谱(XPS)对涂层表面形貌、载银量、银元素纵向分布及特征进行了表征,并通过金黄色葡萄球菌检验了涂层的抗菌性能。结果表明:两步电化学法可以在纯钛表面制备出含银量较高的多孔涂层,涂层中银元素大部分以纳米颗粒形式存在,涂层表面和最外层Ag元素主要以氧化物的形式存在,而沿涂层法向向内Ag单质与Ag氧化物共存,且涂层具有良好的抗菌性能。
关键词:  多孔涂层  载银  阳极氧化  微弧氧化  TiO2纳米管
DOI:10.3969/j.issn.1007-9289.2013.05.015
分类号:
基金项目:
Preparation of Agloaded Porous Coatings on Commercially Pure Titanium by Twostep Electrochemical Method
YU Sen, YU Zhentao, HAN Jianye, ZHANG Qiang, LIU Chunchao, NIU Jinlong
Northwest institute for nonferrous metal research, Xi’an 710016
Abstract:
The precoatings were prepared on commercially pure titanium by anodic oxidation, then soaked in the AgNO3 solution followed by UV irradiation treatment, and the Agloaded porous coatings were finally prepared after microarc oxidation treatment. The surface morphologies of the Agloaded porous coatings and the amount and chemical characteristics of Ag in the coatings were characterized by using scanning electron microscope (SEM), energy dispersive spectrometer (EDS), and electron spectroscopy for chemical analysis (XPS). The staphylococcus aureus was used to evaluate the antibacterial activity of the coatings. The results show that the TiO2 porous precoatings created by anodic oxidation has a high adsorption capacity of silver, and the coatings prepared by twostep electrochemical method still contains a high amount of silver. Most of the particles are nanosilver. The Agloaded porous coatings prepared by twostep electrochemical method have good antibacterial properties.
Key words:  porous coatings  Agloaded  anodization  microarc oxidation  TiO2 nanotubes
手机扫一扫看