引用本文:徐 轶,朱旻昊,莫继良,雷 斌,周仲荣.两种TiAlN涂层的往复滑动摩擦学性能研究*[J].中国表面工程,2006,(2):13~16
XU Yi, ZHU Min-hao, MO Ji-liang, LEI Bin, ZHOU Zhong-rong.Study on Tribological Properties of two TiAlN Coatings Under Reciprocating Sliding Condition[J].China Surface Engineering,2006,(2):13~16
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 3452次   下载 2322 本文二维码信息
码上扫一扫!
分享到: 微信 更多
两种TiAlN涂层的往复滑动摩擦学性能研究*
徐 轶,朱旻昊,莫继良,雷 斌,周仲荣
1.西南交通大学 材料先进技术教育部重点实验室, 四川 成都 610031;2.自贡硬质合金有限责任公司 成都分公司,四川 成都 610100
摘要:
采用PLINT磨损试验机,对比考察了2种磁控溅射TiAlN涂层在往复滑动条件下的摩擦磨损性能。在摩擦动力学分析基础上,并利用扫描电子显微镜(SEM) 、激光共焦显微镜(LCSM)、电子能谱(EDX)和X射线衍射XRD进行了微观分析,探讨了TiAlN涂层的摩擦磨损机理。结果表明:TiAlN涂层的摩擦学性能与涂层本身微结构密切相关;较低的摩擦因数对应着较好的耐磨性;涂层的往复滑动磨损表现为磨粒磨损、剥层和氧化磨损的共同作用的机制。
关键词:  TiAlN涂层  往复滑动  摩擦  磨损  干态
DOI:
分类号:
基金项目:*教育部新世纪创新人才支持计划(NCET–04–0885);四川省科技攻关计划(04CN032–009)资助项目。
Study on Tribological Properties of two TiAlN Coatings Under Reciprocating Sliding Condition
XU Yi, ZHU Min-hao, MO Ji-liang, LEI Bin, ZHOU Zhong-rong1,2,3
1.The Key Laboratory of Advanced Technologies of Materials (Ministry of Education), Southwest Jiaotong University;2.Chengdu 610031, China;3.2.Zigong Cemented Carbide (Chengdu) Corp., Ltd., Chengdu 610031, China
Abstract:
The tribological properties under reciprocating sliding condition of two TiAlN coatings, prepared by magnetic sputtering, had been tested on a PLINT wear tester. Some micro-examination methods, such as scanning electron microscopy (SEM) and Energy Dispersive X-ray spectrum (EDX) and X-ray diffraction (XRD), were used to analyze the friction and wear mechanism of two TiAlN coatings. The experimental results showed that the tribological properties of TiAlN coatings were deeply dependent on their microstructures, and the lower friction coefficient was corresponding to the better wear-resistance. The mechanism of reciprocating sliding wear for TiAlN was the combination of abrasive wear, oxidation wear and delamination.
Key words:  TiAlN coating  reciprocating sliding  friction  wear  dry condition
手机扫一扫看