引用本文:李志,曲敬信,赵振业,邵荷生.高温滑动磨损过程中氧化物磨屑的演变机制研究[J].中国表面工程,2002,(4):23~24,27
.The Research of Evolving Mechanism of Wear Debris in High Temperature Sliding Wear Systmes[J].China Surface Engineering,2002,(4):23~24,27
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被：浏览 3203次   下载 93次 本文二维码信息
码上扫一扫！
分享到： 微信 更多
字体:加大+|默认|缩小-
高温滑动磨损过程中氧化物磨屑的演变机制研究
李志,曲敬信,赵振业,邵荷生
作者单位
摘要:
在65Mn钢分别与3Cr2W8V钢和真空熔结铁基合金涂层（成分是4.5%C-46%C-1.0%Si-2.0%B-6.3%Ni-Fe余量）组成的高温滑动磨损系统中，研究了氧化物磨屑的演变机制，证明磨损过程中磨屑不仅存在氧化，碎化等机械，化学过程，还存在因相互挤压而粘结甚至微区热压烧结等冶金过程，两方面的共同作用，使氧化物磨屑成分均匀化。应用Fe-O系统相图和Fe3O4-Cr2O3系统相图，分析两磨损系统磨屑形态差别的原因。
关键词:  氧化物磨屑 高温滑动磨损 成分均匀化 微区热压烧结
DOI：
分类号:TH117.1
基金项目:
The Research of Evolving Mechanism of Wear Debris in High Temperature Sliding Wear Systmes
LI Zhi  QU Jing-xin  ZHAO Zhen-ye  SHAO He-sheng
Abstract:
The evolving mechanism of wear debris was studied in two high temperature sliding wear systems composed of 65Mn steel with 3Cr2W8V steel and 65Mn steel with iron-base alloy coating (4.5%C - 46%Cr - 1.0%Si - 2.0%B - 6.3%Ni - Fe bal.) respectively. The results proved that during wear process, the wear debris can be not only oxidized and broken, but also experienced some metallurgical processes like hot press sintering at small areas due to hot extruding. Because of the two side effects, the composition of debris can become homogeneous. The reason of different debris morphology for two wear systems was analyzed using Fe-O system and Fe3O4-Cr2O3 system phase diagrams.
Key words:  oxide wear debris,high temperature sliding wear,homogenization of composition,hot press sintering at small areas
手机扫一扫看