引用本文: | 王亮,$2.奥氏体不锈钢低温低压等离子体渗氮[J].中国表面工程,1999,(3):22~23,27 |
| .Low Pressure Plasma Arc Ion Nitriding of Austenitic Stainless Steel[J].China Surface Engineering,1999,(3):22~23,27 |
|
|
摘要: |
利用低了子体弧源离子渗氮技术,在低压(4×10^-1Pa)、低温(350~400℃)条件下进行奥氏体不锈钢表面渗氮处理,可在奥氏体不锈钢表面形成硬度高、耐蚀性好、厚度10μm左右的向氏体中的过饱和固溶体氮化层,最高表面氮浓度达到45%左右 |
关键词: 低压 等离子体 离子渗氮 不锈钢 低温 |
DOI: |
分类号:TG161.82 |
基金项目: |
|
Low Pressure Plasma Arc Ion Nitriding of Austenitic Stainless Steel |
Wang Liang Xu Bin Yu Zhiwei Xu Xiaolei Hei Zukun
|
Abstract: |
|
Key words: low pressure plasma arc source, ion-nitriding, austenite stainless steel, |