| 摘要: |
| 以磷酸 H3PO4 、氢氧化铝 Al(OH)3和氧化铬 CrO3 为原料合成了磷酸铝铬胶黏剂(ACP)，并制备了以该磷酸铝铬为胶黏剂，胶体石墨为固体润滑剂的粘结固体润滑涂层。研究了石墨与磷酸铝铬胶黏剂的质量比、磷酸铝铬胶黏剂中金属离子与磷酸根的比值、铬含量以及磷酸铝铬的合成温度对润滑涂层摩擦磨损性能的影响。结果表明：磷酸铝铬胶黏剂的耐温性能优良，以磷酸铝铬为胶黏剂的石墨固体润滑涂层具有优异的减摩抗磨性能；磷酸铝铬胶黏剂的组成、分子结构对固体润滑涂层的摩擦磨损性能有较大影响，其中当磷酸铝铬胶黏剂中金属离子与磷酸根的比值(M∶P)为1∶3，铬铝比(Cr∶Al)为1∶3，合成温度为100~110 ℃时，石墨磷酸铝铬润滑涂层的摩擦磨损性能最好。 |
| 关键词: 磷酸铝铬 石墨 摩擦学性能 粘结固体润滑涂层 |
| DOI：10.3969/j.issn.1007-9289.2013.05.017 |
| 分类号: |
| 基金项目: |
|
| Preparation and Tribological Behaviors of Graphite-phosphate Solid Lubricating Coatings |
|
LIU Cancan, CHEN Lei, Zhou Jiansong, Zhou Huidi, CHEN Jianmin1,2
|
|
1.State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000;2.University of Chinese Academy of Sciences, Beijing 100049
|
| Abstract: |
| By using aluminum hydroxide Al(OH)3, phosphoric acid H3PO4 and chromium oxide CrO3 as raw materials, the aluminum chromium phosphate (ACP) binder were prepared. The coatings were obtained by using phosphate as the base material and graphite as the lubrication. The effects of synthesis condition of binder and the amount of addition of graphite on tribological properties of the lubricating coatings was investigated. The results show that the lubricating coatings have excellent heatresisting performance and antifriction and wearresistance properties. Besides, tribological properties of the lubricating coatings are related with their synthesis conditions, which contain mass ratio of graphite and aluminum phosphate chrome adhesive, molar ratio of metal and phosphoric acid, the content of chromium, and the synthesis temperature of aluminum phosphate chrome adhesive. |
| Key words: aluminum chromium phosphate graphite tribological properties bounded solid lubricating coating |
