Volume 24,Issue 4,2011 Table of Contents

   
Other Issues:  
  

应用实例

[Example 22]Brush Plating Technology Applied to the Remanufacturing of Automotive Engine Block
  HU Zhen–feng
  2011,24(4) [Abstract(3788)]  [View PDF 1.76 M (2191)]
  

摩擦学

Equipment Remanufacturing Design and Its Content System
  ZHU Sheng, YAO Ju–kun
  2011,24(4):1-6 [Abstract(4887)]  [View PDF 544.42 K (2567)]
  

表面工程

Influence of Nitrogen Flows on Properties of CrAlN Film Prepared by Mid–frequency Unbalanced Magnetron Sputtering
  LV Yan–hong1,2, KONG Qing–hua1,2, JI Li1, LI Hong–xuan1, LIU Xiao–hong1, CHEN Jian–min1, ZHOU Hui–di1
  2011,24(4):7-12 [Abstract(3865)]  [View PDF 1.56 M (2561)]
  
Cause and Control of the Crack of Laser Clad High Temperature Self–lubricating Coatings
  GAO Yong–jian1, ZHANG Shi–tang1, DENG Zhi–chang2, BAO Min2, ZHOU Jian–song3
  2011,24(4):13-18 [Abstract(3720)]  [View PDF 5.39 M (2463)]
  
Diamond Films Deposited on Copper With Different Interlayers
  TIAN Meng–kun1, YU Zhi–ming1, LIU Xue–zhang1, GE Jing–xuan1, WANG Ling1, HUANG Chen2
  2011,24(4):19-24 [Abstract(4040)]  [View PDF 3.28 M (2279)]
  
The Corrosion Behavior for Zn–Al–Mg Coating in NaCl System
  LI Feng, LV Jia–shun, YANG Hong–gang, XU Xiao–lian, ZHONG Bin, AI Fang–fang
  2011,24(4):25-29 [Abstract(4067)]  [View PDF 1.27 M (3051)]
  
Preparation of Al2O3–TiB2 Composite Ceramic Coating and Corrosion–resistant Property to Molten Zinc
  LV Yan–hong,WU Xu–sheng,LIU Yan–fei,WU Zi–jian
  2011,24(4):30-33 [Abstract(3860)]  [View PDF 3.38 M (2097)]
  
Preparation Processes of Black Oxidation Film on Ti–6Al–4V Titanium Alloy
  XIA Cheng–bao, TU Ming–wu, PAN Qing–jun
  2011,24(4):34-37 [Abstract(3827)]  [View PDF 465.11 K (2457)]
  
Microstructure of Fe–based Alloy Composite Coatings Reinforced by Ti(C、N) Particles Through Laser Cladding Technology
  QI Yong–tian1, ZOU Zeng–da2
  2011,24(4):38-42 [Abstract(3783)]  [View PDF 2.00 M (2073)]
  
Influence of Ultrasonic Vibration on Friction and Wear Properties of GCr15/45 Steel Frictional Pairs Under Oil Lubrication
  YANG Shan–lin, ZANG Yan, QIAO Yu–lin, DONG Xin–yu
  2011,24(4):43-46 [Abstract(3999)]  [View PDF 5.00 M (2062)]
  
Friction Characteristics of DLC Films on the Silicon Nitride Ceramic Surfaces at High Temperature Conditions
  ZHUO Hui–dan, SONG Bao–yu, GU Le
  2011,24(4):47-50 [Abstract(4214)]  [View PDF 4.72 M (2363)]
  
The Status of Zr in the High Cr Cast Iron Hardfacing Layer
  TIAN Da–biao
  2011,24(4):51-54 [Abstract(3876)]  [View PDF 3.14 M (2094)]
  
Effects of Hydrazine Concentration on the Properties of ZnS Thin Film Deposited by Chemical Bath Deposition
  YE Ya–kuan, ZHANG Gong, ZHUANG Da–ming
  2011,24(4):55-59 [Abstract(4424)]  [View PDF 2.48 M (2297)]
  
Properties of Current Distribution in Processing of Electrochemical Finishing
  AMINA·Kader, ADAYI·Xieeryazidan, PING Zong–bao, HE Lian–ying
  2011,24(4):60-65 [Abstract(3800)]  [View PDF 1.48 M (2443)]
  
Preparation and Characterization of Hydrophobic Triazine–dithiol Molecular Film
  FANG Gang, KANG Zhi–xin
  2011,24(4):66-69 [Abstract(3910)]  [View PDF 489.79 K (2968)]
  
Improved Wedge Method of the AFM Friction Force Calibration
  CHEN Tian–xing, ZHANG Xiang–jun, MENG Yong–gang
  2011,24(4):70-75 [Abstract(4069)]  [View PDF 899.81 K (3106)]
  

再制造工程

Fatigue Life of Corroded Simulative Components for Typical Aircraft Structures Before and After Overhaul
  CHEN Qun–zhi, YANG Rui–qin, ZHANG Lei, FANG Zhen–qian
  2011,24(4):76-79 [Abstract(4052)]  [View PDF 1.60 M (2652)]
  
Calibration of the Flexible Remanufacturing Restoration System
  WU Xiang1, MA Zi1, XU Fu–jia2, HU Ying1
  2011,24(4):80-84 [Abstract(3804)]  [View PDF 1.30 M (2185)]