引用本文: | 赵 希, 李景飞 , 张永萍.电动机维修应用研究[J].中国表面工程,2006,(7):254~255 |
| ZHAO Xi , LI Jing-fei,ZHANGYong-ping.Study on Application of Electromotor Maintenance[J].China Surface Engineering,2006,(7):254~255 |
|
摘要: |
电机维修是保证电机长期运行或使电机二次利用的最佳途径。通常电机修理是采用与技术参数相对应的方法对电机再次修理,而修理后的电机参数基本没变,在原有的运行环境和条件下,很容易再次出现问题,文中根据电机的工作原理,从电机发生故障的内因分析,找出主要故障原因,进行“增容”、“补偿”改进修理,达到电机再生适应原环境和运行条件。 |
关键词: 电机 增容 原理修理 |
DOI: |
分类号: |
基金项目: |
|
Study on Application of Electromotor Maintenance |
ZHAO Xi , LI Jing-fei,ZHANGYong-ping
|
1a Electronic Engineering Department, 1b Control Engineering Department Armor Technique Institute of PLA, Changchun 130117
|
Abstract: |
Electromotor maintenance is the best way of insuring long-term running or making the secondary use of electromotor. Usually the electromotor maintenance adopts the method which is corresponding to technique parameters to repair the electromotor. However, the electromotor parameters basically have no change after repair and under original running conditions, problems will appear again frequently. According to the working principle of electromotor, the main reasons were found out from the internal cause of failure of electromotor, and “capacitance increase” and “compensation” were repaired to achieve the aim of electromotor to adapt to the original environment and conditions. |
Key words: electromotor capacitance increase repair according to principle |