| 引用本文: | 张 平，梁志杰，王海军，谭 俊，蔡志海.装甲装备发动机气缸套/活塞环摩擦副再制造技术研究[J].中国表面工程,2006,(7):92~95 |
| ZHANG Ping, LIANG Zhi-jie, WANG Hai-jun, TAN Jun , CAI Zhi-hai.Study on Remanufacturing technology of Cylinder Liner/Piston Ring for Armored Equipment Engine[J].China Surface Engineering,2006,(7):92~95 |
|
| 摘要: |
| 在装甲装备发动机中，气缸套/活塞环摩擦副的工况非常恶劣，腐蚀磨损情况严重。论文首先对发动机气缸套/活塞环摩擦副进行了失效分析，然后对气缸套/活塞环摩擦副的再制造技术进行了系统调研研究，在此基础上，提出发动机气缸套/活塞环摩擦副再制造关键技术方案，并对发动机气缸套/活塞环摩擦副再制造进行了方案设计与试验探索。 |
| 关键词: 装甲装备 发动机 气缸套/活塞环 再制造技术 |
| DOI： |
| 分类号: |
| 基金项目: |
|
| Study on Remanufacturing technology of Cylinder Liner/Piston Ring for Armored Equipment Engine |
|
ZHANG Ping, LIANG Zhi-jie, WANG Hai-jun, TAN Jun , CAI Zhi-hai
|
|
Academy of Armored Force Engineering, National Key Laboratory for Remanufacturing, Beijing, 100072
|
| Abstract: |
| The running condition of armored equipment engine’s cylinder liner/piston ring was very bad. And the corrosion wear was also very serious. Firstly, the failure analysis to the cylinder liner/piston ring was done. Then the technologies of remanufacturing the cylinder liner/piston ring were systematically studied and the possibility of applying advanced surface engineering to remanufacture the friction pairs. And the remanufacturing technology of the cylinder liner/piston ring was discussed. Finally, the experimental search about the remanufacturing technology of the cylinder liner/piston ring was made preliminary. |
| Key words: armored equipment, engine, cylinder liner/piston ring, remanufacturing technology |
