引用本文:杨继荣，段广洪，向　东.面向再制造工程的绿色模块化设计方法研究[J].中国表面工程,2006,(7):67~70
Yang Ji-rong, Duan Guang-hong, Xiang Dong.The Research on the method of the green modular design for Remanufacture Engineering[J].China Surface Engineering,2006,(7):67~70
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被：浏览 3202次   下载 2481次 本文二维码信息
码上扫一扫！
分享到： 微信 更多
字体:加大+|默认|缩小-
面向再制造工程的绿色模块化设计方法研究
杨继荣，段广洪，向　东1,2
1.湖南文理学院 机械工程系, 湖南常德 415000;2.２.清华大学 绿色制造研发中心, 北京100084
摘要:
以装备的再制造性为设计目的，以模块化设计方法为基础，辅助之绿色设计思想，利用现代数学工具，从而形成面向再制造工程的绿色模块化设计方法，在装备设计初期其实体生命诞生之前就全面考虑装备在其今后全生命周期内的环境属性及零部件的重用性，并用反映其环境特性的绿色度及反映其功能和重用特性的模块度加以评价和检验。利用此设计方法和技术能同时满足装备的环境属性和再制造性要求，从而满足再制造工程的根本目的。
关键词:  装备  再制造工程  绿色模块化  设计方法
DOI：
分类号:
基金项目:湖南省教育厅资助科研项目（ 05Ｃ718）
The Research on the method of the green modular design for Remanufacture Engineering
Yang Ji-rong, Duan Guang-hong, Xiang Dong1,2
1. Mechanical engineering department of Hunan University of Arts and Science. Hunan,changed,415000;2. The research and development centre of green manufacturing of Tsinghua University beijin,100084
Abstract:
with the remanufacturing properties of equipments as design purposes,and the method of the modular design as base, anothe it was assisted by green design ideas, take advantage of modern means of mathematics,then form the method of the green modular design for Remanufacture Engineering. The properties of environmental character and reemploy ability have been taken into account all-round in initial stage of the design of equipments and before it come into being；moreover it was examined by green degree about environmental character and modular degree about reemploy ability.Combining green design and modular design can meet environmental characters of equipment and remanufacturing ability simultaneously, then it meet that the root purpose of the Remanufacture Engineering.
Key words:  equipments  remanufacture engineering  green modular  method of the design
手机扫一扫看