引用本文:郭金花，陆曹卫，倪晓俊，吴嘉伟，卢志超，连法增.电弧喷涂Fe基非晶硬质涂层的组织及性能研究[J].中国表面工程,2006,(5):45~48
GUO Jin-hua , LU Cao-wei, NI Xiao-jun, WU Jia-wei, LU Zhi-chao, LIAN Fa-zeng.Microstructure and Properties of Fe-based Amorphous Hard Coatings Prepared by Electric Arc Spraying[J].China Surface Engineering,2006,(5):45~48
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被：浏览 3579次   下载 3253次 本文二维码信息
码上扫一扫！
分享到： 微信 更多
字体:加大+|默认|缩小-
电弧喷涂Fe基非晶硬质涂层的组织及性能研究
郭金花，陆曹卫，倪晓俊，吴嘉伟，卢志超，连法增1,2,3
1.东北大学 材料与冶金学院, 辽宁 沈阳110004;2.钢铁研究总院, 北京 100081;3.安泰科技股份有限公司, 北京 100081
摘要:
利用电弧喷涂方法制备了两种铁基非晶涂层。对涂层的微观组织形貌进行了扫描电镜观察，发现FeCrMoMnBCSi涂层组织更致密；涂层主要由晶化相和非晶相共同组成，其中涂层中非晶相的相对含量可以通过对XRD衍射结果进行Pseudo-Voigt拟合计算而得；涂层的维氏显微硬度（HV）超过了1000，属于超硬涂层。涂层成分及组织结构的差异直接影响了涂层的力学性能。
关键词:  电弧喷涂  涂层  非晶
DOI：
分类号:
基金项目:北京市重大项目基金资助(0405003000021)
Microstructure and Properties of Fe-based Amorphous Hard Coatings Prepared by Electric Arc Spraying
GUO Jin-hua , LU Cao-wei, NI Xiao-jun, WU Jia-wei, LU Zhi-chao, LIAN Fa-zeng1,2,3
1.School of Materials Science and Metallurgy，Northeastern university, Shenyang 110004;2.Central Iron & Steel Research Institute, Beijing 100081;3.Advanced Technology and Materials Co. Ltd, Beijing 100081
Abstract:
Electric arc spraying technique was used to prepare the iron-based coatings.The microstructure and morphologies of the coatings were observed by the scanning electron microscope.The results showed that the FeCrMoMnBCSi coating was denser.It was composed of a mixed structure of amorphous and crystalline phases.The fraction of amorphous phase was calculated by fitting Pseudo-Voigt function to each diffraction peak of XRD analysis.The Vickers hardness(HV)of the superhard coating was above 1000.The mechanical properties of the coating were directly affected by its composition and structure.
Key words:  electric arc spraying  coating  amorphous
手机扫一扫看