高硬度马氏体时效堆焊焊条的研究

潘永明<sup>1</sup>; 陈绍维<sup>1</sup>; 杨 冰<sup>2</sup>

引用本文:	潘永明，陈绍维，杨冰.高硬度马氏体时效堆焊焊条的研究[J].中国表面工程,2006,(3):20~22
	PAN Yong-ming , CHEN Shao-wei , YANG Bing.Research on Failed Surfacing Welding Rod of High-Rigidity Martensite[J].China Surface Engineering,2006,(3):20~22

【打印本页】【HTML】【下载PDF全文】【查看/发表评论】【EndNote】【RefMan】【BibTex】

←前一篇|后一篇→

过刊浏览高级检索

本文已被：浏览 2787次下载 2438次	码上扫一扫！
分享到：微信更多字体:加大+\|默认\|缩小-
高硬度马氏体时效堆焊焊条的研究
潘永明，陈绍维，杨冰^1,2
1.哈尔滨焊接研究所哈尔滨　150080;2.鞍钢新轧钢股份公司设备处, 辽宁鞍山 114031

摘要:

研制成功的Co、Mn、W、V马氏体时效钢堆焊焊条，解决了堆焊高硬度焊接材料时，硬度均匀性差及机械加工困难的问题，提高了耐磨工件的使用寿命及其修复时的生产效率，能给国民经济带来了极大经济效益和社会效益。

关键词: 堆焊焊条

DOI：

分类号:

基金项目:

Research on Failed Surfacing Welding Rod of High-Rigidity Martensite

PAN Yong-ming , CHEN Shao-wei , YANG Bing^1,2

1. Welding Research Institute of Harbin, Harbin 150080;2.New steel Rolling Co.Ltd of An shan Iron & steel works, An shan Liaoning 114031

Abstract:

The developed aged martensite surfacing welding rod with Co,Mn,W and V solved the difficult problems of poor homogeneity of hardness and mechanical processing, prolonged the service life of wear-resistant components and increased the productive efficiency of repairing, that brang a great benefit to the national economy.

Key words: welding rod