引用本文:杨洗陈,李会山,刘运武,王云山,唐英,孙荣禄.激光再制造技术及其工业应用[J].中国表面工程,2003,(4):43~46
.Laser Remanufacturing Technology and Its Industrial Application[J].China Surface Engineering,2003,(4):43~46
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被：浏览 3237次   下载 92次 本文二维码信息
码上扫一扫！
分享到： 微信 更多
字体:加大+|默认|缩小-
激光再制造技术及其工业应用
杨洗陈,李会山,刘运武,王云山,唐英,孙荣禄
作者单位
摘要:
针对机械装备修复技术，阐述了激光再制造技术概念及激光再制造系统构成：三维激光光束头、三维激光涂敷系统、CAD／CAM软件和控制检测系统。展示了30层连续熔敷后的组织形貌，说明组织和硬度都比较均匀，并介绍了若干激光修复工业应用实例。
关键词:  激光 再制造技术 激光熔敷 工业应用
DOI：
分类号:TN249 TH16
基金项目:天津市科委资助项目
Laser Remanufacturing Technology and Its Industrial Application
YANG Xi-chen  LI Hui-shan  LIU Yun-wu  WANG Yun-shan  TANG ying  SUN Rong-lu
Abstract:
The laser remanufacturing (LR) technology for repairing some expensive and important equipment was developed. The LR system consisted of 3D laser beam coaxial powder feeding nozzle, 3D laser-cladding system, 3D CAD/CAM software, measure/control system. The microstructure of 30-layered laser cladded coating was displayed. It had uniform microstructure and hardness. Several examples of its industrial application were also carried out.
Key words:  Laser,remanufacturing technology,laser cladding,industrial applications,
手机扫一扫看