引用本文: | 吴树辉,岳建华,苗军.电弧喷涂防磨技术在电站锅炉排粉机叶轮上的研究与应用[J].中国表面工程,2003,(1):43~45,48 |
| .Research and Application of Arc-spray Anti-wear Technique for the Impeller of Powder Evacuation Machine Used in Boilers of Power Plant[J].China Surface Engineering,2003,(1):43~45,48 |
|
|
摘要: |
借鉴电弧喷涂在引风机等类似部件上的应用经验,结合排粉机叶轮特殊的工作环境,综合运用电弧喷涂和火焰喷焊的优点,通过一系列试验研究,使电弧喷涂技术和火焰喷焊技术有效的应用于较引风机叶轮的服役环境更为恶劣的排粉机叶轮上,并取得良好的效果。 |
关键词: 电弧喷涂 火焰喷焊 防磨 排粉机叶轮 电站锅炉 |
DOI: |
分类号:TG174.442 TG115.58 |
基金项目: |
|
Research and Application of Arc-spray Anti-wear Technique for the Impeller of Powder Evacuation Machine Used in Boilers of Power Plant |
WU Shu-Hui1 YUE Jian-Hua1 Miao Jun2
|
Abstract: |
A combined arc-spraying and flame spraying-welding technique was successfully applied for the impeller of powder evacuation machine, which shows more severer service conditions than the impellers of air pumps, through a series of researches and experiments. A good result was obtained and described in this paper. |
Key words: arc spraying,flame spraying-welding,anti-wear,impeller of powder evacuation machine, |