引用本文:谢凤宽,梁志杰,陈宗浩.摩擦电喷镀Ni–Co–MoS2复合镀层结构与摩擦学性能[J].中国表面工程,2002,(2):27~28
.Microstructure and Tribological Properties of Ni-Co- MoS2 Composite plating layer produced by friction electro-spraying plating[J].China Surface Engineering,2002,(2):27~28
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被：浏览 3290次   下载 101次 本文二维码信息
码上扫一扫！
分享到： 微信 更多
字体:加大+|默认|缩小-
摩擦电喷镀Ni–Co–MoS2复合镀层结构与摩擦学性能
谢凤宽,梁志杰,陈宗浩
作者单位
摘要:
采用摩擦电喷镀技术制备Ni–Co–MoS2 复合镀层,系统试验研究了复合镀层结构与摩擦学性能.结果表明,含MoS2微粒的复合镀层与基体结合良好,基质金属密实,无明显裂纹,MoS2微粒均匀地分散在镀层中,MoS2微粒的加入,可有效改善镀层的耐磨性.
关键词:  摩擦电喷镀  复合镀  摩擦因数
DOI：
分类号:TG174.441;TG115.58
基金项目:
Microstructure and Tribological Properties of Ni-Co- MoS2 Composite plating layer produced by friction electro-spraying plating
XIE Feng-kuan  LIANG Zhi-jie  CHEN Zong-hao
Abstract:
A Ni-Co-MoS2 composite plating layer was prepared by friction electro-spraying plating technique, its microstructure and tribelogical properties were investigated systematically. The results showed that the MoS2containing composite plating layer possesses good bonding strength with substrate, dense microstructure without cracks and homogeneously distributed MoS2 particles. The addition of MoS2 can improve effectively the wear-resistance of plating layer.
Key words:  friction electrical spray plating,composite plating,friction coefficient
手机扫一扫看