引用本文:高殿奎,付宇明.3Cr2W8V热疲劳裂纹的止裂与修复[J].中国表面工程,2001,(4):42~44
.Arresting and Repairing of Hot Fatigue Crack in 3Cr2W8V Steel[J].China Surface Engineering,2001,(4):42~44
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2479次   下载 107 本文二维码信息
码上扫一扫!
分享到: 微信 更多
3Cr2W8V热疲劳裂纹的止裂与修复
高殿奎,付宇明
作者单位
摘要:
运用电磁效应理论最新研究成果,采用脉冲放电方法,对3Cr2W8V热挤压凸模的热疲劳裂纹实施了止裂试验。止裂后的裂纹尖端变得十分圆整。达到了钝化止裂的目的。显微组织分析证明:止裂处出现了强韧性极高的超细化组织,改善了裂尖处的机械性能。止裂也为热疲劳裂缝刷镀修复创造了理想的先决条件。
关键词:  脉冲放电止裂 修复 热作模具 热疲劳裂纹 止裂 挤压模具
DOI:
分类号:TG375.41
基金项目:河北省自然科学基金(599255)、国家自然科学基金(19772046)
Arresting and Repairing of Hot Fatigue Crack in 3Cr2W8V Steel
GAO Diankui FU Yuming WANG Ping BAI Xiangzhong LI Hui
Abstract:
Based on the recent research of electro- magnetic heat effect, the crack preventing has been applied around the hot fatigue crack inside a hot extrusion die of 3Cr2W8V steel through pulse discharge. The curvature of crack tip increased after crack arresting, so the crack tip was passivated. The analysis on microstructure showed that the super fine structure appeared at crack arresting area, the mechanical properties were improved. The crack arresting provided an ideal precondition for brush electroplating repairing of hot crack.
Key words:  crack arresting through pulse current discharge,3Cr2W8V,repair
手机扫一扫看