引用本文:粱秀兵,田保红,刘世参.高速电弧喷涂铝涂层性能试验研究[J].中国表面工程,1998,(4):21~24
.Study on Al Coating Sprayed with High Velocity Arc Spray[J].China Surface Engineering,1998,(4):21~24
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 3321次   下载 88 本文二维码信息
码上扫一扫!
分享到: 微信 更多
高速电弧喷涂铝涂层性能试验研究
粱秀兵,田保红,刘世参
作者单位
摘要:
本文对高速电弧喷涂铝涂层和普通电弧喷涂铝涂层进行了对比试验研究。结果表明:高速电弧喷涂粒子束更加集中,粒子的飞行速度显著提高,粒子的雾化效果明显改善。高速电弧喷滁铝涂层具有结合强度高、硬度高、孔隙率低、组织致密等特点。
关键词:  铝涂层 高速电弧喷涂 粒子束 组织 硬度 结合强度 通电 研究 雾化效果 孔隙率
DOI:
分类号:TG174
基金项目:
Study on Al Coating Sprayed with High Velocity Arc Spray
Liang Xiubing  Tian Baohong  Liu Shican
Abstract:
In this paper, Al is sprayed with the new high velocity arc spray gun and the generally used one. The properties and the microstructure of the coating are compared. Results show that concentrated spray plume and high particle velocity are acquired. The quality of atomized particle is improved. The Al coating sprayedwith the high velocity arc spray gun has high bonding strength, high hardness, low porosity and dense structure.This coating is of good quality.
Key words:  High velocity arc spray, Al coating,Particle plume
手机扫一扫看