引用本文:李振铎，于月光，曾克里，任先京，贾贤赏.球形烧结态Cr3C2–25%NiCr复合粉末制备研究[J].中国表面工程,2006,(7):182~186
LI Zhen-duo, YUE Yue-guang, ZENG Ke-li, REN Xian-jing, JTA Xian-shang.Research on preparation of spheroidal sintered Cr3C2-25%NiCr composite powder[J].China Surface Engineering,2006,(7):182~186
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被：浏览 3569次   下载 2130次 本文二维码信息
码上扫一扫！
分享到： 微信 更多
字体:加大+|默认|缩小-
球形烧结态Cr3C2–25%NiCr复合粉末制备研究
李振铎，于月光，曾克里，任先京，贾贤赏
北京矿冶研究总院， 北京 100044
摘要:
试验通过添加高分子分散剂配制Cr3C2–25%NiCr料浆，采用喷雾干燥技术制备球形粉末，在保护气氛下进行液相烧结，气流粉碎分级后形成合适粒度粉末。实验研究了不同分散剂含量对喷雾干燥制备Cr3C2–25%NiCr复合粉末性能的影响，液相烧结工艺对Cr3C2与NiCr合金相之间冶金化结合状态的影响。研究结果表明：高分子分散剂能够很好的调解料浆性能，使喷雾干燥粉末具有良好的物性。采用SEM、XRD及化学成分分析表明粉末物理性能与国外粉末相当，超音速火焰喷涂涂层性能较好。
关键词:  喷雾干燥  高分子分散剂  液相烧结  超音速火焰喷涂
DOI：
分类号:
基金项目:
Research on preparation of spheroidal sintered Cr3C2-25%NiCr composite powder
LI Zhen-duo, YUE Yue-guang, ZENG Ke-li, REN Xian-jing, JTA Xian-shang
Beijing General Institute of Mining and Metallurgy, Beijing 100044
Abstract:
A type of high polymer disperser was added in slurry for preparing Cr3C2-25％NiCr spheroidal powder by spray dried, which was liquid sintered under protective gas, and finally the suitable grain powder was obtained through comminution by gas stream. The effect of different content of disperser in the slurry to spray dried powder properties and liquid sinter process to metallurgical bonding of Cr3C2 and NiCr alloy was studied in this paper. The result indicates that the better physical properties of spray dried powder is obtained through high polymer disperser conciliated slurry. SEM and X-ray diffraction are used to analyze chemical component and physical properties of powder. Properties of nickel chrome chromium carbide powders are similar to the international powders , HVOF sprayed coating has excellent mechanical properties.
Key words:  spray dried  high polymer disperser  liquid sintered  high velocity oxygen fuel spray
手机扫一扫看