引用本文:刘贵民, 马丽丽, 郑铁军.无损检测技术在再制造工程中的应用展望[J].中国表面工程,2006,(7):118~120
LIU Gui-min, MA Li-li, Zheng Tie-jun.A Prospect of Applications of NDT Technology in Remanufacturing Engineering[J].China Surface Engineering,2006,(7):118~120
【打印本页】   【HTML】   【下载PDF全文】   【查看/发表评论】  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被：浏览 2693次   下载 2450次 本文二维码信息
码上扫一扫！
分享到： 微信 更多
字体:加大+|默认|缩小-
无损检测技术在再制造工程中的应用展望
刘贵民, 马丽丽, 郑铁军1,2
1.装甲兵工程学院 装备再制造国防科技重点实验室，北京100072;2.装甲兵工程学院 装备技术保障系, 北京100072
摘要:
阐明了无损检测（NDT）技术在再制造（RM）工程体系中的作用，介绍了超声波检测、射线检测、涡流检测、磁粉检测以及渗透检测等五大常规NDT技术的原理与适用范围，以实例的形式给出了NDT技术在RM工程中的应用情况。对NDT技术的研究和发展情况进行了回顾，在此基础上对NDT技术在RM工程中的应用方向和前景进行了展望。
关键词:  再制造工程  无损检测  应用
DOI：
分类号:
基金项目:
A Prospect of Applications of NDT Technology in Remanufacturing Engineering
LIU Gui-min, MA Li-li, Zheng Tie-jun1,2
1.National Key laboratory for Remanufacturing, Academy of Armored Forces Engineering, Beijing, 100072;2.Department of Technical Support Engineering, Academy of Armored Forces Engineering, Beijing, 100072
Abstract:
The function of non-destructive test (NDT) technology in the remanufacturing engineering (RM) system was described. The mechanism and the application range of the five frequently applied NDT techniques, such as ultrasonic testing, radiographic testing, eddy current testing, magnetic particle testing, as well as penetrant flaw testing, were also introduced in the present paper. Typical applications of NDT techniques in the RM engineering were illustrated. A review of the development history of NDT technology was given and hence the direction and prospect of the NDT application in RM engineering were put forward.
Key words:  Remanufacturing engineering  non-destructive test  application
手机扫一扫看