引用本文: | 梁志杰,徐滨士,张 平,王海军,谭 俊,韩 树,蔡志海.军用装甲装备发动机再制造技术初探与可行性分析[J].中国表面工程,2006,(7):89~91 |
| LIANG Zhi-jie, XU Bin-shi,ZHANG Ping, WANG Hai-jun, TAN Jun, HAN Shu,CAI Zhi-hai.Discussion and Feasibility Analysis of Remanufacturing technology for Armored Equipment Engines[J].China Surface Engineering,2006,(7):89~91 |
|
摘要: |
论文综述了我军军用装甲装备发动机服役和维修情况;针对目前军用装甲装备发动机维修存在的弊端,初步探讨了装甲装备发动机再制造技术,并对装甲装备发动机再制造的可行性进行了深入分析,最后对装甲装备发动机再制造的应用前景进行了展望。 |
关键词: 装甲装备 发动机 再制造技术 可行性分析 |
DOI: |
分类号: |
基金项目: |
|
Discussion and Feasibility Analysis of Remanufacturing technology for Armored Equipment Engines |
LIANG Zhi-jie, XU Bin-shi,ZHANG Ping, WANG Hai-jun, TAN Jun, HAN Shu,CAI Zhi-hai
|
Academy of Armored Force Engineering, National Key Laboratory for Remanufacturing, Beijing, 100072
|
Abstract: |
The present situation of Chinese military armored equipment engines service and maintaining was introduced. Based on the maintaining shortcoming of military armored equipment, the remanufacturing technology of armored equipment engines was put forward and discussed preliminary. The possibility of applying the technology was systematically summarized. At last,the application perspect of remanufacturing technology for armored equipment engines was outlooked. |
Key words: key word: armored equipment, engine remanufacturing technology feasibility analysis |