引用本文: | 王望龙,胡仲翔,时小军,杨军伟,张甲英,林允森.机床数控化再制造信息数据库研究[J].中国表面工程,2006,(7):86~88 |
| WANG Wang-long, HU Zhong-xiang, SHI Xiao-jun, YANG Jun-wei, ZHANG Jia-ying, LIN Yun-sen.Study on Database of Machine tool Remanufacture Information[J].China Surface Engineering,2006,(7):86~88 |
|
摘要: |
对老旧机床进行数控化再制造可以使旧机床恢复精度,并实现数控化,但其涉及技术繁多庞杂,文中介绍了老旧机床在数控化再制造过程中需要涉及的各种技术,并对这些技术归纳、分类研究分析,研发出信息数据库,为老旧机床数控化再制造提供强大的技术支持。 |
关键词: 旧机床 数控化 再制造 数据库 |
DOI: |
分类号: |
基金项目: |
|
Study on Database of Machine tool Remanufacture Information |
WANG Wang-long, HU Zhong-xiang, SHI Xiao-jun, YANG Jun-wei, ZHANG Jia-ying, LIN Yun-sen
|
National Key Laboratory for Remanufacturing, Beijing 10072
|
Abstract: |
CNC remanufacture for the used machining tools renew old machine tool’s precision and cnc, but it tools is a systematic engineering involving all kinds of technical support from different fields. This thesis introduces all kinds of technical support from different fields, set up a information system of CNC remanufacture for the used machining tools, offer support of technology for it. |
Key words: Old machine tool NC remanufacturing database |