引用本文: | 张忠诚,张红兵.黄铜表面的发黑处理研究[J].中国表面工程,2003,(1):41~42,48 |
| .Study on Surface Blackening Treatment of Brass[J].China Surface Engineering,2003,(1):41~42,48 |
|
|
摘要: |
使用不含CuSO4的亚硒酸发黑液在常温下对黄铜进行了表面发黑处理,并与多种发黑工艺的发黑膜进行了对比。研究表明所提出的发黑系统成本低,配方简单,得到的发黑膜黑度高,色泽好,附着力明显提高。 |
关键词: 黄铜 二氧化硒 表面发黑处理 发黑膜 黑度 色泽 附着力 |
DOI: |
分类号:TG177 |
基金项目: |
|
Study on Surface Blackening Treatment of Brass |
ZHANG Zhong-cheng ZHANG Hong-bing
|
Abstract: |
A formulation free of CuSO4 was proposed with which a brass sample was blacked at room temperatures. The blackening layer thus obtained was compared to various blackening layers made by different systems showing that this formulation has a lower cost. The blackened surface of brass displayed an excellent color and a much stronger adhesive strength to the substrate. |
Key words: blackening,brass,selenium oxide |