引用本文: | 何志洪,顾斌,张惠生,王凯晖,何伟良.单螺杆泵转子磨损表面的修复[J].中国表面工程,1997,(3): |
| .Repair of the Rotor Wear Surface of Single-Screw Pump[J].China Surface Engineering,1997,(3): |
|
|
摘要: |
单螺杆泵转子表面的磨损是造成该种泵失效的主要原因。本课题在研究单螺杆系转子磨损失效机理的基础上,探讨了几种可行的表面修复方法,通过大量的试验研究,确定了单螺杆泵转子磨损表面的金属刷镀修复工艺,为解决生产实际问题提供了可靠途径。 |
关键词: 单螺杆泵,转子,磨损,修复 |
DOI: |
分类号:TG17 |
基金项目: |
|
Repair of the Rotor Wear Surface of Single-Screw Pump |
He Zhihong Gu Bin Zhang Huisheng Wang Kaihui He WeiliangBeijing
|
Abstract: |
Make use of the single - screw pump is moreand more common in the fields of construction engineer-ing, oil industry, textile industry, food industry,medicine industry and so on. The main cause of failure forthe single - screw pump is the wear of the rotor surface.There is not a kind of reliable and economic method whichcan repair it. This situation causes waste and reduces theproductivity. We have researched the wear principle of thesingle - screw pump rotor. A few surface repair methodshave heen tested. The conclusion is that the brush platingis a kind of ideal method to repair the rotor wear surface ofsingle - screw pump. A lot of experiments have beendone, we have determined the repair technology process ofthe single -serew pump rotor wear surface. It supplies areliable method to solve the practical problem. |
Key words: single-screw pump, rotor, wear, repair, |