引用本文:仝健民,李继红.铝热——自蔓延高温合成钢管内表面陶瓷涂层的工艺研究[J].中国表面工程,1995,(2):
.The Investigation on Technology of Thermit SHS Method to Produce Ceramic Coating in Inner Surface of Steel Pipe[J].China Surface Engineering,1995,(2):
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 2999次   下载 83  
分享到: 微信 更多
铝热——自蔓延高温合成钢管内表面陶瓷涂层的工艺研究
仝健民,李继红
作者单位
摘要:
本文研究静态、铝热—自蔓延高温合成方法形成钢管内表面陶瓷涂层的工艺,确定了影响涂层质量的工艺因素,并分析了陶瓷涂层的组织和硬度分布。
关键词:  自蔓延高温合成,铝热法,陶瓷涂层。
DOI:
分类号:TG174.44
基金项目:
The Investigation on Technology of Thermit SHS Method to Produce Ceramic Coating in Inner Surface of Steel Pipe
Tong Jian-min Li Ji --hongQinghua University
Abstract:
Abstract This paper investigated the technology to produce ceramic coating in inner surface of steel pipe by state thermit SHS method. The technological factor to influence the coating quality had been determined. The microstructure and hardness distribution of coating was also determined.
Key words:  Self-- propagating High Temperature Synthesis,thermit, Ceramic Coating,
手机扫一扫看